Download Realtek USB Audio Driver 6.3.9600.40 for Windows 10 64-bit (Sound Card). Go to Device Manager (right click on My Computer, choose Manage and then find.
- Download Matica USB Devices Driver
- Download Matica Usb Devices Driver Windows 10
- Download Matica Usb Devices Driver Free
Starting with Windows 10, release 1703, a USB Audio 2.0 driver is shipped with Windows. It is designed to support the USB Audio 2.0 device class. The driver is a WaveRT audio port class miniport. For more information about the USB Audio 2.0 device class, see https://www.usb.org/documents?search=&type%5B0%5D=55&items_per_page=50.
The driver is named: usbaudio2.sys and the associated inf file is usbaudio2.inf.
The driver will identify in device manager as 'USB Audio Class 2 Device'. This name will be overwritten with a USB Product string, if it is available.
The driver is automatically enabled when a compatible device is attached to the system. However, if a third-party driver exists on the system or Windows Update, that driver will be installed and override the class driver.
Architecture
usbaudio2.sys fits within the wider architecture of Windows USB Audio as shown.
Related USB specifications
When you plug the device into your USB, Windows will look for the associated driver, if it cannot find this driver then you will be prompted to insert the driver disc that came with your device. Common USB Device errors are ‘ usb port not working ‘, ‘device descriptor request failed error’ or ‘bugcodeusbdriver’ issues. Intel Android device USB driver, free download. Adds functionality in Windows for management of Android phone and tablet devices with an Intel Atom CPU chip installed. Includes tests and PC download for 32-bit/64-bit systems.
The following USB specifications define USB Audio and are referenced in this topic.
- USB-2 refers to the Universal Serial Bus Specification, Revision 2.0
- ADC-2 refers to the USB Device Class Definition for Audio Devices, Release 2.0.
- FMT-2 refers to the Audio Data Formats specification, Release 2.0.
The USB-IF is a special interest group that maintains the Official USB Specification, test specifications and tools.
Audio formats
The driver supports the formats listed below. An alternate setting which specifies another format defined in FMT-2, or an unknown format, will be ignored.
Type I formats (FMT-2 2.3.1):
- PCM Format with 8..32 bits per sample (FMT-2 2.3.1.7.1)
- PCM8 Format (FMT-2 2.3.1.7.2)
- IEEE_FLOAT Format (FMT-2 2.3.1.7.3)
Type III formats (FMT-2 2.3.3 and A.2.3):
- IEC61937_AC-3
- IEC61937_MPEG-2_AAC_ADTS
- IEC61937_DTS-I
- IEC61937_DTS-II
- IEC61937_DTS-III
- TYPE_III_WMA
Feature descriptions
This section describes the features of the USB Audio 2.0 driver.
Audio function topology
The driver supports all entity types defined in ADC-2 3.13.
Each Terminal Entity must have a valid clock connection in compatible USB Audio 2.0 hardware. The clock path may optionally include Clock Multiplier and Clock Selector units and must end in a Clock Source Entity.
The driver supports one single clock source only. If a device implements multiple clock source entities and a clock selector, then the driver will use the clock source that is selected by default and will not modify the clock selector’s position.
A Processing Unit (ADC-2 3.13.9) with more than one input pin is not supported.
An Extension Unit (ADC-2 3.13.10) with more than one input pin is not supported.
Cyclic paths in the topology are not allowed.
Audio streaming
The driver supports the following endpoint synchronization types (USB-2 5.12.4.1):
- Asynchronous IN and OUT
- Synchronous IN and OUT
- Adaptive IN and OUT
For the asynchronous OUT case the driver supports explicit feedback only. A feedback endpoint must be implemented in the respective alternate setting of the AS interface. The driver does not support implicit feedback.
There is currently limited support for devices using a shared clock for multiple endpoints.
For the Adaptive IN case the driver does not support a feedforward endpoint. If such an endpoint is present in the alternate setting, it will be ignored. The driver handles the Adaptive IN stream in the same way as an Asynchronous IN stream.
The size of isochronous packets created by the device must be within the limits specified in FMT-2.0 section 2.3.1.1. This means that the deviation of actual packet size from nominal size must not exceed +/- one audio slot (audio slot = channel count samples).
Descriptors
An audio function must implement exactly one AudioControl Interface Descriptor (ADC-2 4.7) and one or more AudioStreaming Interface Descriptors (ADC-2 4.9). A function with an audio control interface but no streaming interface is not supported.
The driver supports all descriptor types defined in ADC-2, section 4. The following subsections provide comments on some specific descriptor types.
Class-Specific AS interface descriptor
For details on this specification, refer to ADC-2 4.9.2.
An AS interface descriptor must start with alternate setting zero with no endpoint (no bandwidth consumption) and further alternate settings must be specified in ascending order in compatible USB Audio 2.0 hardware.
An alternate setting with a format that is not supported by the driver will be ignored.
Each non-zero alternate setting must specify an isochronous data endpoint, and optionally a feedback endpoint. A non-zero alternate setting without any endpoint is not supported.
The bTerminalLink field must refer to a Terminal Entity in the topology and its value must be identical in all alternate settings of an AS interface.
The bFormatType field in the AS interface descriptor must be identical to bFormatType specified in the Format Type Descriptor (FMT-2 2.3.1.6).
For Type I formats, exactly one bit must be set to one in the bmFormats field of the AS interface descriptor. Otherwise, the format will be ignored by the driver.
To save bus bandwidth, one AS interface can implement multiple alternate settings with the same format (in terms of bNrChannels and AS Format Type Descriptor) but different wMaxPacketSize values in the isochronous data endpoint descriptor. For a given sample rate, the driver selects the alternate setting with the smallest wMaxPacketSize that can fulfill the data rate requirements.
Type I format type descriptor
For details on this specification, refer to FMT-2 2.3.1.6.
The following restrictions apply:
| Format | Subslot size | Bit resolution |
|---|---|---|
| Type I PCM format: | 1 <= bSubslotSize <= 4 | 8 <= bBitResolution <= 32 |
| Type I PCM8 format: | bSubslotSize 1 | bBitResolution 8 |
| Type I IEEE_FLOAT format: | bSubslotSize 4 | bBitResolution 32 |
| Type III IEC61937 formats: | bSubslotSize 2 | bBitResolution 16 |
Class-Specific AS isochronous audio data endpoint descriptor
For details on this specification, refer to ADC-2 4.10.1.2.
The MaxPacketsOnly flag in the bmAttributes field is not supported and will be ignored.
The fields bmControls, bLockDelayUnits and wLockDelay will be ignored.
Class requests and interrupt data messages
The driver supports a subset of the control requests defined in ADC-2, section 5.2, and supports interrupt data messages (ADC-2 6.1) for some controls. The following table shows the subset that is implemented in the driver.
| Entity | Control | GET CUR | SET CUR | GET RANGE | INTERRUPT |
|---|---|---|---|---|---|
| Clock Source | Sampling Frequency Control | x | x | x | |
| Clock Selector | Clock Selector Control | x | |||
| Clock Multiplier | Numerator Control | x | |||
| Denominator Control | x | ||||
| Terminal | Connector Control | x | x | ||
| Mixer Unit | Mixer Control | x | x | x | |
| Selector Unit | Selector Control | x | x | ||
| Feature Unit | Mute Control | x | x | x | |
| Volume Control | x | x | x | x | |
| Automatic Gain Control | x | x | |||
| Effect Unit | – | ||||
| Processing Unit | – | ||||
| Extension Unit | – |
Additional information on the controls and requests is available in the following subsections.
Clock source entity
For details on this specification, refer to ADC-2 5.2.5.1.
At a minimum, a Clock Source Entity must implement Sampling Frequency Control GET RANGE and GET CUR requests (ADC-2 5.2.5.1.1) in compatible USB Audio 2.0 hardware.
The Sampling Frequency Control GET RANGE request returns a list of subranges (ADC-2 5.2.1). Each subrange describes a discrete frequency, or a frequency range. A discrete sampling frequency must be expressed by setting MIN and MAX fields to the respective frequency and RES to zero. Individual subranges must not overlap. If a subrange overlaps a previous one, it will be ignored by the driver.
A Clock Source Entity which implements one single fixed frequency only does not need to implement Sampling Frequency Control SET CUR. It implements GET CUR which returns the fixed frequency, and it implements GET RANGE which reports one single discrete frequency.
Clock selector entity
For details on this specification, refer to ADC-2 5.2.5.2
The USB Audio 2.0 driver does not support clock selection. The driver uses the Clock Source Entity which is selected by default and never issues a Clock Selector Control SET CUR request. The Clock Selector Control GET CUR request (ADC-2 5.2.5.2.1) must be implemented in compatible USB Audio 2.0 hardware.
Feature unit
For details on this specification, refer to ADC-2 5.2.5.7.
The driver supports one single volume range only. If the Volume Control GET RANGE request returns more than one range, then subsequent ranges will be ignored.
The volume interval expressed by the MIN and MAX fields should be an integer multiple of the step size specified in the RES field.
If a feature unit implements single channel controls as well as a master control for Mute or Volume, then the driver uses the single channel controls and ignores the master control.
Additional Information for OEM and IHVs
OEMs and IHVs should test their existing and new devices against the supplied in-box driver.
There is not any specific partner customization that is associated with the in-box USB Audio 2.0 driver.
This INF file entry (provided in a update to Windows Release 1703), is used to identify that the in-box driver is a generic device driver.
The in-box driver registers for the following compatible IDs with usbaudio2.inf.
See the USB audio 2.0 specification for subclass types.
USB Audio 2.0 Devices with MIDI (subclass 0x03 above) will enumerate the MIDI function as a separate multi-function device with usbaudio.sys (USB Audio 1.0 driver) loaded.
The USB Audio 1.0 class driver registers this compatible ID with wdma_usb.inf.
And has these exclusions:
An arbitrary number of channels (greater than eight) are not supported in shared mode due to a limitation of the Windows audio stack.
IHV USB Audio 2.0 drivers and updates
Download Matica USB Devices Driver
For IHV provided third party driver USB Audio 2.0 drivers, those drivers will continue to be preferred for their devices over our in-box driver unless they update their driver to explicitly override this behavior and use the in-box driver.
Audio Jack Registry Descriptions
Starting in Windows 10 release 1703, IHVs that create USB Audio Class 2.0 devices having one or more jacks have the capability to describe these jacks to the in-box Audio Class 2.0 driver. The in-box driver uses the supplied jack information when handling the KSPROPERTY_JACK_DESCRIPTION for this device.
Jack information is stored in the registry in the device instance key (HW key).
The following describes the audio jack information settings in the registry:
<tid> = terminal ID (As defined in the descriptor)
<n> = Jack number (1 ~ n).
Convention for <tid> and <n> is:
- Base 10 (8, 9, 10 rather than 8, 9, a)
- No leading zeros
- n is 1-based (first jack is jack 1 rather than jack 0)
For example:
T1_NrJacks, T1_J2_ChannelMapping, T1_J2_ConnectorType
Download Matica Usb Devices Driver Windows 10
For additional audio jack information, see KSJACK_DESCRIPTION structure.
These registry values can be set in various ways:
By using custom INFs which wrap the in-box INF for the purpose to set these values.
Directly by the h/w device via a Microsoft OS Descriptors for USB devices (see example below). For more information about creating these descriptors, see Microsoft OS Descriptors for USB Devices.
Microsoft OS Descriptors for USB Example
The following Microsoft OS Descriptors for USB example contains the channel mapping and color for one jack. The example is for a non-composite device with single feature descriptor.
The IHV vendor should extend it to contain any other information for the jack description.
Troubleshooting
If the driver does not start, the system event log should be checked. The driver logs events which indicate the reason for the failure. Similarly, audio logs can be manually collected following the steps described in this blog entry. If the failure may indicate a driver problem, please report it using the Feedback Hub described below, and include the logs.
For information on how to read logs for the USB Audio 2.0 class driver using supplemental TMF files, see this blog entry. For general information on working with TMF files, see Displaying a Trace Log with a TMF File.
For information on 'Audio services not responding' error and USB audio device does not work in Windows 10 version 1703 see, USB Audio Not Playing
Feedback Hub
If you run into a problem with this driver, collect audio logs and then follow steps outlined in this blog entry to bring it to our attention via the Feedback Hub.
Driver development
This USB Audio 2.0 class driver was developed by Thesycon and is supported by Microsoft.
See also
SPD USB Driver helps to detect any SPD powered phones to the computer without installing any ADB or any other driver packages. SPD driver is an essential program to upgrade, flash, update any SPD Smartphones, and Tablets. This is an official website where you can Download SPD Driver’s latest version for Windows computer. So, download the Spreadturm Driver latest 2020 version from below.
Download Matica Usb Devices Driver Free
If you have any Spreadturm (Unisoc) powered Android smartphone or tablet and trying to connect it to the computer. This Spreadturm driver will help you to fix the problem in a few mins. Once you have installed SPD USB Driver on your PC then it will detect your smartphone and tablet to the computer for MTP, Charging, File Transfering, flashing flash file, Firmware Update, and Remove Screen & FRP lock.
SPD Driver Summaries
One-Click easy Installations
Here we share with you a one-click easy installation Spreadturm driver package to install the USB drivers on your pc without facing any error. just download the driver on your pc through the below download link and run to install the drivers on your computer. However, you can also find the manual installation drivers here.
Supported SPD flash tool
Once you have successfully installed SPD driver on your pc, then you can easily flash your SPD devices through SPD Flash Tool (Spreadtrum Flash Tool), it is fully compatible with any version of the SPD flash tool.
Manually installation
We have also manage to share here how to install Spreadturm driver manually on your pc. In case, if the above auto driver installer package not working for you, then you have to install the SPD USB driver manually. So, just download the manual version of the Driver and follow the below process to install it properly.
Supported Write IMEI Tool
It supports SPD Write IMEI tool also, which is helps you to repair IMEI and flash the IMEI on your SPD smartphones and tablets, it is fully compatible with any version of SPD Write IMEI tool.
Supported Professionals Boxes
It supports various Chinese professional box software like Miracle box, UMT SPD, Thunder, Madusa, Infinity dongle, Volcano, and many more professional boxes. which helps to flash, repair IMEI, unlock password, pattern, network locks on Spreadturm devices.
Supported SPD Research Download tool
It also helps to detect your phones in SPD Research Download Tool. So now you can easily flash or upgrade your phone without facing any error in the research download tool also.
System Compatibility:
Spreadturm USB driver supported all versions of the Windows operating system. (eg-windows 7, Windows 8, 8.1 Windows 10, Windows XP) both 32 bit and 64-bit version.
Supported Tools & Software
- SPD Research Download Tool
- Miracle Box Latest Setup
- GSM Aladdin
- UMT MTK Setup
- MRT Dongle
- Volcano Box
- Infinity-Box Tool
- GPG Dragon
- SPD Tools
- SPD FRP Tools
- Many more
Download (SPREADTURM) SPD All USB Drivers
DownloadDownloadDownloadDownloadDownloadPrerequisites
- A USB cable to connect your mobile to computer.
- Disable driver signature on If you have windows 8 or 10 based operating system.
How to install & use SPD USB Driver
- Download the driver on your computer first.
- After that, extract the driver on your pc.
- Then open the extracted folder and run the DPInst.exe from the extracted folder.
- Wait for a few seconds to launch the setup.
- Then install the setup from there.
- Once the installation process is completed then restart your windows once.
This is the easy way to install the USB driver on your pc easily if you are facing any errors while flashing these drivers on your pc then you can watch our installation video guides.
Manual Installation
If the above SPD auto-installer Driver package not working for you then you have to download Spreadtrum_usb_driver_20131114 instead of SPD auto installation package. In this situation, you have to install the USB Driver manually on your computer. So, follow the below process step by step carefully.
- First, download the manual installation driver files.
- Extract the USB driver files on your computer.
- Right-click on Start icon and open Device Manager.
- In Device Manager select Action.
- Select Add legacy hardware.
- You will get a popup window, click Next.
- Select the Install the hardware that I have manually select from a list (Advanced) and click Next.
- Select Show All Devices and click Next.
- Click Browse and give the file path of extracted USB driver folder and choose .inf file.
- Now click Open,
- Click Next to begin installing.
- Wait for finish.
- Click finish.
- Done.
Additional information:
The Third-Party INF Does Not Contain Digital Signature:
If you facing digital signature errors while installingthe driver then follow the below steps first to fix the problem in a few seconds.
- Run Command Prompt as Administrator Permission.
- Then copy and paste the Code: bcdedit /set testsigning on
- Restart your computer.
- Now you can see “Test Mode” is enabled.
- That’s it, Now install SPD USB Driver on your computer.
How to Flash:
If you want to learn how to flash stock firmware files on SPD phones using SPD flash or Research download tool then you can check our detailed step by step guidelines to Flash Pac Flash file on SPD Android Phones properly.
Spreadturm Driver:
It’s mandatory to install Spreadturm Driver before you try to flash your SPD phones. make sure: spd driver is compatible only with SPD Android smartphones and tablets.
Credits:
SPD USB driver package and distributed by Spreadturm.Inc, but we repack it’s only for you. Thank you.