Download Lorex Sound Cards & Media Devices Driver

Download Lorex Sound Cards & Media Devices Driver Windows 7
Download Lorex Sound Cards & Media Devices Driver
Download Lorex Sound Cards & Media Devices Drivers
Download Lorex Sound Cards & Media Devices Driver Updater
Download Lorex Sound Cards & Media Devices Driver Windows 10

The New App 'Lorex Home' features are great too, such as Continues recording, Motion Light, Longer Clips, and Siren. The downside, Lorex no longer supports Cloud storage and relies heavenly on the SD card provided or owner's for this device. Not a big deal, unless the SD card gets corrupted while recording which is rare. Click OK to start the download. The video file will be saved to your computer. When backing up videos from the FLIR Cloud Client software on a computer, the default export is.dav file format. The option to save files in.avi format is available for PC (Windows OS) only.

Your LNR Series NVR system supports audio recording with audio-capable cameras (not included). Audio-capable cameras have either a built-in microphone or a camera with audio input cables that can be connected to an external microphone. Depending on your camera model you can either use Listen-In audio to be alerted to sounds occurring around your camera or you can also use 2-Way Audio to speak and listen to those around your camera with an external speaker (not included).

Prerequisites:

Ensure that your camera is audio-capable. Check your camera user manual for details. Click here for downloads and documentation for your product.
Ensure that you have connected your cameras to your Router and the same Local Area Network (LAN) as your NVR. Click here for information on how to connect your IP Camera to your NVR.

LIMITATION: The MIC IN / OUT ports on the rear panel of the system cannot be used for audio recording. They are used for service only.

IMPORTANT: Using surveillance audio can be restricted or regulated depending on your location. Always verify with local authorities how to properly make use of your audio enabled system without breaking any privacy laws. Audio recording without consent is illegal in certain jurisdictions. Lorex by FLIR assumes no liability for use of its products that does not conform with local laws.

To set up audio recording with a camera with built-in microphone:

Connect the camera using an Ethernet cable to one of the Ethernet ports on the back of the NVR.

IMPORTANT: The microphone must also be connected to a powers source.

To set up audio recording with a camera with and external microphone:

Connect the camera using an Ethernet cable to one of the Ethernet ports on the back of the NVR.
Connect your camera to a self-powered external microphone.

Once you have connected your cameras, you must enable audio recording using your NVR menu.

To enable audio recording on your NVR:

Right-click on the Live View to access the Quick Menu
Click Main Menu and then click the Camera icon ().
Click Recording >Recording.
Click the Channel drop-down menu to select the channel where the audio-capable camera is connected.
Check the Audio/Video checkbox to enable audio recording.
Click the Audio Encode drop-down menu to select the format that will be used to record audio.
RECOMMENDED: Set G711a as the audio format.
Click OK to save changes.

The following FAQs answer many questions about the LNWDB1 Lorex doorbell.

Is the LNWDB1 doorbell compatible with voice assistance?

Yes.

The LNWDB1 doorbell is now compatible with Amazon Alexa and Google Assistant.

The following are the voice commands:

Amazon Alexa

Alexa, show me [doorbell name].
When someone rings the doorbell, Alexa will say 'Someone is at [doorbell name]”; then you can say “Alexa, answer the [doorbell name].”
Echo show (screen) device required.

Google Assistant

Hi Google, show me [doorbell name].

How do I install the doorbell?

For a detailed instruction on how to safely remove your existing doorbell and install the Lorex doorbell, please read and follow all instructions of our installation guide.

Can I download, back up, or share a video from my doorbell?

Yes.

Please read our full tutorial here on how to download, back up, or share a video.

What happens when the doorbell receives too low voltage?

Doorbell hotspot will not work.
The reset button will not work.
It will show the blue LED as solid then will keep flashing while it cycles. Watch it here.

What happens when the doorbell receives the proper amount of voltage?

You will hear a sound.
You will see a pulsing blue light and running light on the LED ready to connect. Watch it here.

Can I remove or delete a specific video clip from my Timeline on the Lorex Home app?

No.

If you want to remove or delete a specific video clip so it does not appear on your Timeline, you will have to remove it from the SD card.

To do this, remove the doorbell from its mount, retrieve the SD card from the back of the doorbell, insert the card to PC or Mac, find the folder containing the video clip and delete it.

Why is the SD card slot located at the back of the doorbell?

Removing the SD card from the doorbell may appear to be a cumbersome process since it involves unmounting the doorbell. The location of the SD card slot is part of the security design because no one should easily access the onboard SD card.

Does the doorbell support SmartZone and Person/Vehicle Detection?

No.

The doorbell does not have SmartZone (Area) feature and it does not support Person and Vehicle detection.

However, the doorbell is equipped with Motion Detection feature. Make sure to activate the motion detection feature on your doorbell.

To activate the motion detection feature of your doorbell, launch the Lorex Home app.

Go to Settings > Detection Settings > toggle the button to ON.

Will the doorbell stop recording after 10 seconds even when there is still motion going on?

There is no 10 seconds limitation on motion recording. The doorbell will continue to record motion events and will not stop recording unless the subject stops moving.

If your doorbell fails to record during motion, we recommend that you adjust your doorbell’s Motion Sensitivity on the Lorex Home app.

To adjust your doorbell’s Motion Sensitivity, go to Settings > Detection Settings > Motion Sensitivity > adjust to your desired sensitivity (1 minimum to 5 maximum).

Another reason your doorbell fails to record during motion is poor network coverage. If your doorbell is receiving poor coverage, we recommend getting a router extender.

Why is my doorbell picking up motion from passing cars at night?

The doorbell is equipped with passive infrared (PIR) sensor which detects motion from heat-emitting objects. At night, when temperature drops, the sensor is particularly sensitive and may detect heat from moving vehicles and send you alerts.

If you are receiving constant alerts of passing cars, you may have to reposition your doorbell so it only covers your porch. We recommend installing a wedge to allow the doorbell to have a better viewing and detecting angles.

How does the doorbell receive power?

The doorbell is wired and as such you can use your existing doorbell wiring to power the Lorex doorbell. To make sure the doorbell receives enough power, you will have to install a chime kit in your indoor chime box. Please refer to our installation guide for more details on chime kit installation.

What is the compatible app of the doorbell?

The doorbell is compatible with the Lorex Home app. You can download the app free from Apple App Store or Google Play.

What is the minimum recommended upload speed for remote video streaming?

We recommend 3.5 Mbps or higher.

What is the maximum storage capacity?

The doorbell has a dedicated local storage and comes with a 16GB micro SD card. You can upgrade the storage for up to 64GB.

NOTE: Before purchasing a new card for your doorbell, please make sure it is compatible with the unit. Please check the SD card compatibility chart before purchasing.

Does the doorbell have a dedicated cloud storage?

The doorbell uses local storage. It comes with a 16 GB Micro SD card. You can upgrade and replace the card to a maximum of 64 GB.

How to reset the doorbell?

The reset button is located at the back of the doorbell.

To reset the doorbell, remove it from the mount and press the reset button until you hear the reset chime.
Set up the doorbell again on the Lorex Home app as a new device.

To reconnect the device to the Lorex Home app, please see our setup guide here.

How do I streamline notifications?

To make sure you receive the appropriate notifications from your doorbell, please streamline your Notifications Settings in the Lorex Home app and on your mobile device.

Download lorex sound cards & media devices drivers

What are the unique features of the doorbell?